Experienced prefab assemblers in steel and concrete Haparanda
About the position We are looking for experienced prefab assemblers for a short and intensive project in Haparanda with a focus on assembling building structures in steel and concrete. The project is suitable for you if you want to work intensively during a limited period and are accustomed to a fast pace. For the right person, there are good opportunities for extension or permanent employment after the project ends. Project information Location: Haparanda Start: November 2, 2026 End: December 19, 2026 Project duration: approximately 6–7 weeks Work tasks Assembly of prefabricated concrete and steel structures Work according to drawings and assembly plans Teamwork with a focus on safety and efficient execution Requirements Very good experience in prefab assembly Experience in frame erection in steel and/or concrete Good drawing reading skills Accustomed to working at a fast pace Merits Hot work Fork lift certification Fall protection training Application Send your CV and a description of your experience. Selection is ongoing.
Car Assembly Technician at Zenvo Automotive
Build something few in the world get to be part of At Zenvo Automotive, we don't build ordinary cars. We build some of the world's most exclusive and technically advanced hypercars with passion, precision and pride in every detail. Now we're looking for you who want to work practically, close to the product and be part of building our cars together with an engaged team where expertise, collaboration and quality mean everything. Maybe you work today as a car mechanic, motorsport technician, aircraft technician or with other advanced assembly. Maybe you're looking for the next step, a place where your craftsmanship is truly appreciated and where what you build really stands out. About the role As a Car Assembly Technician with us, you become an important part of the team that builds our hypercars from the ground up. You work with assembly, fitting, installation, adjustment and finishing of vehicles in absolute top class. You work with everything from chassis, mechanics and electrical systems to detail finishing, problem-solving and final assembly before testing. This is a role for you who likes to work with your hands, think solution-oriented and feel proud when something is truly finished. Job responsibilities Assemble mechanical, electrical and structural components Build vehicles from chassis to finished test-ready car Work according to drawings, instructions and technical documentation Cable routing, fitting, adjustment and detail assembly Troubleshoot and solve practical challenges together with engineers and colleagues Participate in testing, improvements and development work Contribute to order, quality and strong teamwork in the workshop We're looking for you who Thrive in a practical role where you get to create results every day and feel pride in what you do. You are thorough, have an eye for details that others easily miss and appreciate quality, order and structure in your work. You enjoy collaborating with others, willingly share your knowledge and contribute to good team spirit. You take responsibility, help out where needed and are motivated by being part of building something extraordinary. To succeed in this role, we see that you have: Documented experience of qualified mechanical assembly in a precision environment, for example in the automotive industry, aviation, motorsport or similar professional activities. The experience can be acquired through professional work or through qualified personal projects (e.g. advanced vehicle builds), where work has been done to drawings, technical specifications and high precision requirements and quality. Very good understanding of mechanical systems and ability to independently interpret drawings, identify deviations and ensure correct assembly. You have several years of experience working from drawings, work instructions and technical specifications. An initiative-taking and practical approach with a strong focus on quality and collaboration. Ability to thrive in a workshop environment where the pace is sometimes high and work develops continuously. Good English language skills in speech and writing, as the group language is English. Knowledge of Danish is an asset but not a requirement. B driving licence. The position as a car assembly technician is linked to Zenvo Automotive's headquarters and workshop in Præstø on southern Zealand, southeast of Copenhagen, and employment takes place in Denmark. Præstø is within commuting distance from Skåne, approximately 1 hour and 20 minutes from Malmö and approximately 1 hour and 45 minutes from Helsingborg. Why people enjoy working at Zenvo With us, you become part of a growing company with short distances, strong team spirit and great pride in what we build. We believe in skilled people, unpretentious collaboration and a working environment where everyone contributes. You get to work close to the product, close to the decisions and together with people who care about both the result and each other. Interested? In this recruitment, Zenvo Automotive is collaborating with EmploAI and de Miranda & Partner. Selection will be made after the application deadline. If you want to know more about the position, you are warmly welcome to contact Pernilla Nicklasson, [email protected] or Claudia S. Baronesco via [email protected]. Denmark's Only Hypercar Founded in 2007 by two passionate car enthusiasts. The name Zenvo comes from the combination of our two founders' names. Built on the picturesque Danish island of Zealand, one hour south of Copenhagen, Zenvo has been producing artisan hypercars for over 15 years. Danish By Design Chief designer Christian Brandt and his team take inspiration from the rich history of Danish design, thanks to the principles of masters like Arne Jacobsen that focus on the use of negative space. Individuality Completed in 2008, our first prototype would become the Zenvo ST1, a supercharged and turbocharged car that today sits proudly at the factory in Præstø where it was built. The next model was the TS1 that was powered by a twin supercharged V8. This in-house developed powertrain would become the heart of all Zenvo cars right up to the current Zenvo TSR-GT. The Future At the beginning of 2023 we publicly announced Aurora, a new chapter in the story of Zenvo Automotive. A V12 quad-turbocharged hypercar packaged in a sophisticated yet beautiful carbon monocoque chassis. Just 100 Aurora models will be built and will mark the start of the future of Zenvo's intentions as Denmark's only hypercar brand.
Prototype Technician Hypercar Zenvo Automotive
At Zenvo Automotive, we don't build ordinary cars. We build some of the world's most exclusive and technically advanced hypercars, with passion, precision and pride in every detail. Now we're looking for a prototype technician who wants to work closely with engineers and be a key person in the development of our prototype and pre-series cars. This is a role for you who thrives in an environment where nothing is standard, where each car can be unique and where your technical skills make a real difference. About the role As a Prototype Technician, you will work on building, modifying, maintaining and repairing our prototype and pre-series cars. You ensure that the vehicles are safe, roadworthy and representative for development, testing and demonstration. The work takes place close to engineers and test teams, where you are an important link between design and real drivable product. Main responsibilities Vehicle assembly & modifications: Assemble and modify prototype vehicles according to engineering instructions, build specifications and change notes. Install and remove prototype components. Support rapid configuration changes between test runs or events. Diagnostics, repair & maintenance Perform mechanical, electrical and electronic diagnostics on prototype vehicles. Identify root causes of problems and take corrective action in collaboration with engineers. Perform planned and unplanned maintenance to keep test vehicles in safe and roadworthy condition. Test support: Prepare vehicles for track, road, rig and laboratory testing Support test activities on site (track days, durability testing, customer demonstrations), including rapid repairs and adjustment changes. Install and remove data collection systems, sensors and logging equipment as needed. Documentation & feedback: Document all work completed in build and maintenance documentation. Support root cause analysis and corrective actions for test issues. Clearly report faults, observations and improvement suggestions to engineers and lead technicians. We're looking for you who Thrives in a practical role where you create results every day and feel pride in your work. You are thorough, have an eye for detail and appreciate quality, structure and collaboration. You take responsibility, help where needed and are motivated by building something extraordinary together with others. To succeed in the role we see that you have: Vocational training in automotive engineering, mechatronics or similar Several years of experience as a vehicle technician, preferably in performance cars, motorsport, aviation or prototype work Strong ability in mechanical and electrical troubleshooting Experience reading drawings and electrical diagrams Knowledge of diagnostic tools (OBD, OEM systems, logging) is a plus Understanding of complex and non-standard technical solutions Good English communication skills Class B driving licence Why you'll thrive at Zenvo Automotive With us you become part of a growing company with short decision-making paths, strong team spirit and great pride in what we build. You work close to the product, close to decisions and together with people who care about both the details and the bigger picture. Interested? In this recruitment, Zenvo Automotive is collaborating with EmploAI and de Miranda & Partner. Selection will be made after the application deadline. If you want to know more about the position, you are warmly welcome to contact Pernilla Nicklasson, [email protected] or Claudia S. Baronesco via [email protected]. About the company Denmark's Only Hypercar Founded in 2007 by two passionate car enthusiasts. The name Zenvo comes from the combination of our two founders' names. Built on the picturesque Danish island of Zealand, one hour south of Copenhagen, Zenvo has been producing artisan hypercars for over 15 years. Danish By Design Chief designer Christian Brandt and his team take inspiration from the rich history of Danish design, thanks to the principles of masters like Arne Jacobsen that focus on the use of negative space. Individuality Completed in 2008, our first prototype would become the Zenvo ST1, a supercharged and turbocharged car that today sits proudly at the factory in Præstø where it was built. The next model was the TS1 that was powered by a twin supercharged V8. This in-house developed powertrain would become the heart of all Zenvo cars right up to the current Zenvo TSR-GT. The Future At the beginning of 2023 we publicly announced Aurora, a new chapter in the story of Zenvo Automotive. A V12 quad-turbocharged hypercar packaged in a sophisticated yet beautiful carbon monocoque chassis. Just 100 Aurora models will be built and will mark the start of the future of Zenvo's intentions as Denmark's only hypercar brand.
Zedník, pomocný dělník, řidič sk.B
Pozice: Zedník, pomocný dělník, řidič sk.B. Zaměstnavatel: RM GAS, s.r.o..
Stavebn dělníci
- Kontakt: 602 947 284, e-mail: [email protected] - zkušenosti s montáží inženýrských sítí, ŘP sk. B výhodou
Distributor reklamních letáků ( m/ž )
Jsme společnost Česká distribuční, aktuálně druhý největší zaměstnavatel osob se zdravotním postižením v ČR. Pracovní poměr na dobu určitou s možností prodloužení. Co u nás budete dělat? - příjem letáků od dopravce a kontrola jejich počtu, příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Co od Vás požadujeme? - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout Co Vám nabízíme? - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody, individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb, místo výkonu práce: dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz. Volat můžete: pondělí-čtvrtek 9 - 15 hod
Distributor/ka reklamních letáků
Jsme společnost Česká distribuční, aktuálně druhý největší zaměstnavatel osob se zdravotním postižením v ČR. Pracovní poměr na dobu určitou s možností prodloužení. Co u nás budete dělat? - příjem letáků od dopravce a kontrola jejich počtu - příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Co od Vás požadujeme? - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout Co Vám nabízíme? - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody - individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb - místo výkonu práce: dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz. V případě zájmu pište na níže uvedený email nebo volejte pondělí-čtvrtek 9 - 15 hod.
Pomocný montážní dělník
První kontakt: e - mailem - [email protected] telefonicky - 602 414 091 Možnost práce v EU.
Montéři kovových konstrukcí
První kontakt: e - mailem - [email protected] telefonicky - 602 414 091 Možnost práce v EU.
Řidiči osobních a malých dodávkových automobilů (kromě taxikářů a řidičů zdravotnické dopravní služby) (m+ž)
Pozice: Řidiči osobních a malých dodávkových automobilů (kromě taxikářů a řidičů zdravotnické dopravní služby) (m+ž). Zaměstnavatel: TAMDA FOODS s.r.o..
Dělníci v oblasti výstavby a údržby budov
První kontakt e-mailem nebo telefonicky. Souhlas zaměstnavatele se zaměstnaneckou kartou.
Stavební instalatér (M/Ž)
Pozice: Stavební instalatér (M/Ž). Zaměstnavatel: Support Supply s.r.o..
DORUČOVATEL/DORUČOVATELKA
Vhodné i pro osoby se zdravotním postižením. Paráková Markéta, tel.: 602430512 (volat pracovní dny 7:00 - 14:00), e-mail: [email protected] Pracovní doba: samostatná organizace pracovní doby, 2 - 6 hodin. Náplň práce: roznos reklamních tiskovin do schránek.
Řemeslníci a kvalifikovaní pracovníci při dokončování staveb
Prvotní informace: e-mail:[email protected] telefonicky: 733575633
distributoři reklamních letáků - OZP
KONTAKT: E-MAILEM, TELEFONICKY (PO - ČT 9:00 - 15:00 hod.) Jsme společnost Česká distribuční, aktuálně druhý největší zaměstnavatel osob se zdravotním postižením v ČR. Pracovní poměr na dobu určitou s možností prodloužení. Co u nás budete dělat? - příjem letáků od dopravce a kontrola jejich počtu - příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Co od Vás požadujeme? - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout Co Vám nabízíme? - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody - individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb - místo výkonu práce: okres dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz.
Distributor reklamních letáků
Upřesňující informace:6) Jsme společnost Česká distribuční, aktuálně druhý největší zaměstnavatel osob se zdravotním postižením v ČR. Pracovní poměr na dobu určitou s možností prodloužení. Co u nás budete dělat? - příjem letáků od dopravce a kontrola jejich počtu - příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Co od Vás požadujeme? - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout Co Vám nabízíme? - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody - individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb - místo výkonu práce: dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz. kontakt e-mail nebo tel. PO - ČT v době od 9:00 - 15:00 hod.
Distributor/ka reklamních letáků
Distributor/ka reklamních letáků - pro OZP! Pracovní poměr na dobu určitou s možností prodloužení. Náplň práce: - příjem letáků od dopravce a kontrola jejich počtu - příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Požadujeme: - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout. Nabízíme: - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody - individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb - místo výkonu práce: dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz.
distibutor/ka reklamních letáků - pouze pro OZP
Jsme společnost Česká distribuční, aktuálně druhý největší zaměstnavatel osob se zdravotním postižením v ČR. Pracovní poměr na dobu určitou s možností prodloužení. Co u nás budete dělat? - příjem letáků od dopravce a kontrola jejich počtu - příprava letáků k roznosu - roznos letáků ve svěřené lokalitě do poštovních nebo hromadných schránek či na odkladná místa (s pomocí naší tašky nebo vozíku na kolečkách) Co od Vás požadujeme? - požadujeme pouze svědomitost a zodpovědnost, zkrátka někoho, na koho se můžeme spolehnout Co Vám nabízíme? - dlouhodobou spolupráci na hlavní pracovní poměr (nárok na nemocenskou a dovolenou) - nástup dle dohody - individuální a vstřícný přístup k zaměstnancům - zkrácený úvazek na 10, 15 nebo 20 hodin týdně - dle velikosti sektoru a počtu schránek - flexibilní rozvržení práce dle svých potřeb - místo výkonu práce: dle místa bydliště uchazeče - zaměstnáním u nás nepřicházíte o nárok na invalidní důchod Jste osoba se zdravotním postižením a nevíte, zda je pro Vás práce vhodná? Otestujte se na www.testdistributora.cz. Více informací najdete na www.distribucni.cz. Kontakt telefonicky nebo e-mailem
Applications Specialist
Do you want to work close to industry, solve real production challenges and make a difference for customers every day? We are now looking for a technically skilled and relationship-building Applications Specialist for cutting machining. Why Sandvik Coromant? With us, you combine technology, customer contact and development in a role where your expertise really makes a difference. You become part of a strong, international environment where collaboration, innovation and knowledge sharing are central. Here you also get: Close collaboration with customers and colleagues in an experienced team Good opportunities for both skills and career development An inclusive culture focused on diversity and fresh thinking About the role You are a key person in our sales organization in Skövde and surrounding areas. You work closely with customers and colleagues to develop technical solutions that create clear customer value. The work is varied and combines technical expertise with consulting, training and problem-solving. Your responsibilities Provide technical advice on products and processing methods such as turning, milling, drilling, threading as well as CAM and digital solutions Troubleshoot and resolve technical challenges in customers' production Implement and test new products and solutions at customer sites Develop and deliver technical presentations and train customers and colleagues Work closely with Account Managers to identify and realize business opportunities Location and working method You will be based from home office and visit customers in the Skövde region and surrounding areas. Your profile You have solid experience in production engineering and technical service and enjoy working in a role where you work independently, project-oriented and close to customers. We would like you to have: Strong knowledge of mechanics and cutting machining Experience with CAD, CAM, CNC and Office 365 Ability to communicate and present fluently in Swedish and English Experience in technical sales and/or Lean is advantageous Your personality is at least as important as your technical skills. You are curious, structured and like to take ownership of your assignments. With a solution-oriented approach, you build trustful and long-term relationships – both internally and externally. You are motivated by improving, developing and seeing concrete results of your work. Our culture Innovation and development are in our DNA and we are proud to shape the future of manufacturing in close collaboration with our customers and partners. We believe in an inclusive, equal and open-minded culture and we value our diversity because it helps us achieve amazing results. As an extra benefit, we also offer many career paths and great benefits for our employees. Now we look forward to meeting you! Want to know more about us and our products? Check out our website, Facebook or LinkedIn. Contact information For more information about the position, you are welcome to contact Kent Andersson, recruiting manager, [email protected] We have taken a position on which recruitment channels and what type of marketing we want to use and kindly but firmly decline further contact. Trade union contacts: Magnus K Berglund, Unionen, 070-616 23 32 Carl-Åke Jansson, Akademikerföreningen, 070-699 63 47 Peter Olsson-Andrée, Ledarna, 070-222 48 55 Responsible recruiter: Ulrika Gruffman How to apply We have continuous selection in this recruitment and ask you to submit your application as soon as possible and no later than August 9, 2026. Click apply and attach your CV and cover letter there. Please note that we do not accept applications via email. Job ID: R0093070. At Sandvik, we value a healthy balance between work and leisure, and due to summer vacations, we may have a somewhat longer response time. For questions regarding the recruitment process, contact HR Services at [email protected]. Sandvik Coromant is part of the Sandvik Group and a world-leading supplier of tools, tool systems, service and know-how to the metal machining industry. Through close collaboration with universities and colleges, extensive investments in research and development and strong partnerships with our customers, we create unique innovations and set new productivity standards. Sandvik Coromant holds over 1,700 patents worldwide, employs around 8,000 employees and is represented in 150 countries.
General Basic Education Teacher
Ķeguma Primary School invites a German language teacher to work for an indefinite period Main duties: • implement educational programs in accordance with the state education standard; • plan, organize and implement pedagogical work in accordance with the goals set in the educational institution; • conduct lessons by selecting diverse teaching methods appropriate to the specific age group and curriculum; • adapt the learning process to students' individual needs and abilities, including inclusive education; • provide students with feedback and assessment of their work; • comply with the work procedures established by the educational institution and other applicable regulations and ethical standards. Application procedure: Please submit application documents – CV and cover letter – by 31 August 2026 to the email addresses: [email protected], [email protected] Contact phone for information: 26414011. Ķeguma Primary School informs that by submitting the requested set of documents, the applicant consents to the processing of personal data, and the personal data indicated in the applicants' application documents will be processed to ensure the implementation of the applicant evaluation process.